Skip to main content
Part of WDI Group (Surrey) Ltdwdigroupltd.co.uk

Costs and running · 6 min read

Winter heating with air conditioning in Carshalton: running costs, controls and comfort

A heating-capable air conditioner can provide winter warmth as well as summer cooling. Learn what affects running costs and how to use HEAT mode.

Published · WDI Group (Surrey) Ltd

Your air conditioning is already a heat pump

If you had a split system fitted for the summer, there is a good chance it can heat as well. A reversible air conditioner is an air-to-air heat pump: in winter it runs the refrigeration cycle backwards, drawing heat from the outside air through the condenser on the wall or patio and releasing it into the room through the indoor unit.

That matters in Carshalton because rooms such as loft conversions in the roads around Carshalton Beeches, rear extensions with big glazed doors, garden offices at the end of long gardens near the Wandle, and converted garages often sit on the edge of the central heating system, or outside it altogether. A unit that cools them in July can usually keep them comfortable in January too.

What actually decides the running cost

Because a heat pump moves heat rather than making it, it can deliver more heat than the electricity it uses. That is why heating mode can be economical, particularly when compared with plug-in fan heaters, oil-filled radiators and other direct electric heaters, which turn one unit of electricity into roughly one unit of heat. It is also efficient for rooms you actually use, because you heat the occupied room rather than the whole house.

We will not tell you it is always cheaper than gas central heating, and we do not quote a fixed cost per hour. The honest answer depends on several things specific to your home:

  • Your electricity tariff, and whether you are on a time-of-use rate
  • The room's heat demand: size, glazing, draughts and how warm you like it
  • Insulation in the walls, loft and floor, especially in older Victorian and 1930s houses
  • Outside temperature, since efficiency falls as the weather gets colder
  • The efficiency of the specific model, plus the energy used by normal defrost cycles

A hypothetical worked example

To show the arithmetic, here is a made-up example. It is not a current tariff, a quote or a guaranteed running cost.

Imagine a unit drawing 0.8 kW of electricity while heating, on an assumed tariff of 25p per kWh. The cost for that hour is 0.8 × 25p = 20p. If the same unit spends part of the hour idling once the room is warm, the average input will be lower; on a very cold morning warming a chilly room from scratch, it may be higher.

The common mistake is to use the figure on the box. A unit sold as 3.5 kW is usually describing its heat output, not its electrical input. To estimate cost, you need the electricity it draws, which varies with conditions. Manufacturers publish rated input and efficiency figures for each model, and those are the figures to use; we can point you to the data sheet for any unit we recommend.

Settings that make a difference

Select HEAT mode (often shown as a sun symbol) rather than AUTO if you want predictable heating. Set a sensible temperature, typically around 19 to 21°C for a living space, and resist turning it right up to warm the room faster: most units do not heat quicker at a higher setpoint, they simply overshoot.

Heat pumps work best at a steady temperature. In a home office or a bedroom used every evening, a schedule or timer that brings the room up gently before you need it tends to be more comfortable, and often more efficient, than switching on and off at full blast. Point the louvres downwards in heating mode, as warm air rises.

One point worth being clear on: heating mode does not dehumidify the way cooling or dry mode does. If you have condensation on a cold window, that is a ventilation question rather than something heating mode will solve.

Defrost is normal

On damp, near-freezing mornings, which are common in this part of Surrey, frost can form on the outdoor unit. The system will pause heating for a few minutes, warm the outdoor coil to clear it, and you may see steam or hear a whoosh. That is a normal defrost cycle, not a fault, and the meltwater needs somewhere to drain away safely.

Keep the outdoor unit clear: no bins pushed against it, no covers, no leaf build-up underneath, and enough space for air to flow freely. A blocked condenser works harder and defrosts more often.

Filters, servicing and correct sizing

Clean the indoor filters as the manufacturer's manual recommends; for many domestic units that is every few weeks during heavy use. Dusty filters reduce airflow and comfort. An annual service checks refrigerant performance, the condensate drain, the coils and the controls, so the unit is in good order before the coldest weeks.

Finally, sizing. A unit chosen only for summer cooling may be fine for winter, or it may struggle in a draughty extension on the coldest days. When we survey, we look at heating as well as cooling, so you know what to expect all year.

Getting advice for your home

If you already have a system and want it checked before winter, or you are thinking about heating a loft, extension or garden room, call WDI Group (Surrey) Ltd on 020 3727 2578 or email info@wdigroupltd.co.uk. We will give you straight, written advice for your property rather than a generic figure.

Frequently asked questions

Is heating with air conditioning cheaper than gas?
Sometimes, but not always. It depends on your electricity and gas prices, the room, insulation, outside temperature and the unit's efficiency. It is generally more economical than direct electric heaters.
Why does my outdoor unit steam in winter?
That is usually a normal defrost cycle clearing frost from the outdoor coil. Heating pauses for a few minutes, then resumes.

Part of WDI Group (Surrey) Ltd

Arrange Your Free Air Conditioning Survey

Tell us about the room or property and we will arrange a free survey, then send a written quotation setting out the system, positions and scope of work.